I know how much I love seeing people’s workspaces, so I’m pleased to show you a few more photos of my own little workshop!
15 May 2015
I see in the photo above this rhodochrosite pendant, these seaglass and cuttlefish cast pendants, and this gorgeous custom moss agate ring. On the left is a box in which I keep all the gemstones that are works in progress – there are some that have been in there for some time, I know. I’ll get to them all eventually, promise.
29 May 2015
Under my bench in this photo is the page I use to bend ring shanks to size when they are not going to be a complete ring, for example when they are going underneath a cabochon setting. I can see some of the pieces from my new extraterrestrial collection, and the work in progress on this divine custom chrysoprase set – one of my favourites, I confess!
30 Jun 2015
There is a sheet of silver over on the right rear, and I see the beginnings of some drusy earrings and this lapis ring – and a few other goodies, too.
30 Jun 2015
And here am I, working away. I can’t tell you how much I enjoy what I do!
14 Aug 2015
A sneak peak at some upcoming treasures for you here – and as always, tea. A nice cup of tea’s what keeps me going sometimes. How about you?
One of the benefits of being part of organising a school reunion is that along the way, you get back in touch with some lovely people that you haven’t seen since your high school days.
I was thrilled to be commissioned to create this lapis lazuli ring for one of these gorgeous friends (there is a love story attached to this friend and the reunion, but that is a tale for another day!)
Could there be much better than creating a thing of beauty for a person with a beautiful heart?
A lovely client, for whom I had previously made this ring, saw these raw ruby pieces that I created and was taken with the idea of a matching set. She asked me if I could source her some special stones.
After a bit of discussion about what colourway she would like, I presented Bek with a few different options – and she fell in love instantly with these totally divine chrysoprase cabochons. So did I, so I was really pleased when she chose them!
I love this set, and it was a joy to create. Let me know if you’d like your own – I’m always happy to go on a rock shopping spree!!
I had a request from a client to turn her husband’s Australian Army major’s crowns into a set of cuff links as a surprise for him.
After a quick refresher to make sure that the melting point of the metal would not be too low to take the soldering, I removed the existing toggles, soldered cuff link backs on the crowns, et voila! (OK, I confess I had to change the direction of the links after a little misunderstanding, but hey – cuff links achieved!)
Following on from my previous post in which you’ll find the first batch of workshop shots, and bringing us up to the minute, I’m visiting my workshop space in space and time. You can sometimes catch me posting more of these snaps on my Instagram page and my FaceBook page – I’d love to see you there!
Here, I’ve come along further with some of those previous pieces, and added this rest of the faceted onyx set and green mojave turquoise ring to the mix. That is my pair of nylon jaw flat nose parallel pliers on the right – fabulous for holding components that are too tiny to be held with fingers while I saw or file or emery, without leaving marks on the metal! Also, a little batch of jellyfish earrings in the making on my soldering block.
6 Nov 2014
The storage expansion continues.. and while it has been there for a while, I draw your attention to my tree stump, kindly provided by a neighbour. It is extremely useful as an ‘anvil’ base, and I’m pleased that even though a tree had to be chopped down, I could salvage a piece of it for a good purpose!
9 Nov 2014
Bead obsessed, much?
21 Nov 2014
Amongst that mass of tools, I see this pendant on my bench peg, and I am still working on that crazy creation underneath!
8 Feb 2015
A couple of repair jobs in the front, some pairs of earrings, a shattuckite pendant and this mojave green ring are all works in progress here! It’s so satisfying to have a number of jobs on the go at once – there is a fair amount of downtime while you’re waiting for things to cool and pickle after soldering.
4 Mar 2015
I quite often have things on my bench waiting for inspiration or the right time to strike – some seaglass is in the process here! Also a bunch of forget-me-nots, which I will post more about another time.
1 Apr 2015
Beads for the beginnings of my Ceramic collection are on my bench this day, as well as a number of stones waiting to be set – including this rhodochrosite pendant! The forget-me-nots are all on my soldering block. Stay tuned.
For a while now, I’ve been taking random pictures of my workspace. Sometimes I post these on my Instagram page, and sometimes on my FaceBook page; but I thought it was time I posted them here for you to see. Look how clean my workspace was only a few months after I first got my jeweller’s bench set up! Look at that nice new engraving ball.
2 Jul 2013
A year later, and I’ve achieved the more lived in look. All clean work in progress mess of course! I spy the beginnings of the Elementals collection.
24 Jan 2014
As time goes on, storage becomes more of an issue, as you can see by the stacks of boxes full of Czech glass.
That’s a wax stick for stone setting you see there amongst the tools and bits and pieces. I was working on this chrysocolla pendant amongst other things here!
Besser brick is not very exciting, but I brighten up my space with a fabulous piece painted by a three year old, and I love my beautiful Granny’s landscape oil painting of the cliffs at Fairlight – it is calming and inspirational. And yes, I do drink a lot of tea!
I love seeing other people’s processes, and I thought it was time to give you all another look into what goes on in my workshop. I have blogged before about how I create one of my signature big chunky rings, and I thought it was time to examine that process again. Here’s how I do it!
Firstly, an appropriate width strip of sterling silver sheet .6mm thick is selected.
This is curved by hand using a pair of half round pliers to fit the gemstone.
Next, the strip is cut to approximately the right length on my bench peg using my jeweller’s saw, leaving a small extension for soldering against.
In this video, you see me prepare and apply the borax, position the solder (not usually quite so fumbly, I had a bit of stage fright!) and solder the bezel together.
Once the metal is cool, it goes into the pickle to be cleaned. An explanation of pickle can be found in my previous blog post.
I trim the excess bezel metal away from the solder join.
I check to make sure the bezel is a good fit.
I emery the bottom of the bezel so that it is completely flat and will make a good join with the base plate.
I select a piece of 1mm thick sterling silver sheet to fit the bezel.
I solder the bezel to the backing plate. Here you see me applying the paillons of solder with borax, and soldering the join. Then it’s back to the pickle.
After rinsing and drying, a bit of a check to see how it’s looking!
Now, I saw the excess metal from around the bezel setting.
After filing the edges of the bezel setting, I start creating the ring shank.
Using the appropriate width of 1.2mm thick sterling silver plate, I bend the shank to the right shape and size.
I trim the shank to the right length.
I hammer the shank with a mallet to get it perfectly round (this shot is for explanation only, I actually have the mandrel hard up against the bench to absorb the force when I’m really hammering the ring!).
Emerying the inside of the shank with my flex drive makes life easier.
After more filing and emerying, I stamp the inside of the shank with my maker’s mark and 925, which marks the metal as being sterling silver (the 92.5% is the fine silver content).
I solder the shank to the bezel setting assembly.
Then it’s time for plenty more filing, and coarse to fine emerying to bring the ring close to it’s finished state. (Zen or tedium, you decide!)
Next, I head over to my trusty engraving ball to set the stone.
Plenty of gentle hammering with my setting hammer later…
And my work, bar some tidying up, is done!
There it is, a beautiful drusy agate ring. I do so love what I do!
Apparently tie bars are coming back into fashion, and I created this one with a company’s logo on it for the company to give to a tie-wearing long-term employee.
A nice way for them to recognize his many years of service!
When I first started silversmithing, I hadn’t made the connection, but I came to realise that I had become part of a family tradition of shaping metal with hammers and fire. There have been smiths in my family since the 1830s. My great-grandfather, great-great-uncle, and great-great-great-grandfather were all village blacksmiths in tiny villages in Kent and Sussex, England.
Great-Great-Uncle Bill Horton working in the forge c 1900 – Brede, Sussex, England
My grandmother, who is now 97, remembers her dad working at his forge first in Guestling Thorne, then in Icklesham, Sussex, making horseshoes and farming implements. He made the gates for Rambledown House in West Chiltington, West Sussex, where my Great-Auntie worked, which I believe may still be there.
Trivet made by Great-Granddad Robert Horton
Great-Granddad also made this gorgeous trivet (I presume for my Great-Granny), a horseshoe with little boots as the legs, which is one of my most treasured possessions.
Hook made by me
A few years ago, I did a weekend blacksmithing workshop at the railway yards in Ipswich. The first thing I smithed was this hook, and I am very proud of it. Building the forge fire using coke, maintaining it, heating the straight iron rod to red hot, and hammering it with a big hammer on a huge anvil was very exciting. I had to adjust to the idea that the metal had to be glowing red, as if you heat silver to that state, it means it’s melting! Although I got covered in black coke dust, and was pretty worn out by the end of the weekend, it was immensely satisfying and something that I mean to do again some day.
I wonder what my great-great-great-grandfather would have thought of my endeavours? I hope he would have been pleased!
