A lovely bloke, who previously commissioned these stacking rings for his partner, asked if I could create her a ring using one of the gemstones he saw in my collection and loved.
I was happy to oblige of course!
The ring was a Christmas gift, and it was a big hit. Yay!! Thanks, Greg!
As well as being a fab sister, Kirsty is also the creator behind the very sweet 2 Favourite Girls jewellery. Check out her gorgeous creations below, and in her online shop!
Rosie, one of my gorgeous repeat customers, asked me to find her a stone similar to this ring that I made for myself. I couldn’t find one exactly the same, but I did find this one.
Setting stones with corners presents a challenge, and I’m really pleased with the way this one turned out.
One of my gorgeous repeat customers, Rosie, asked me to find her a stone similar to this ring that I made for myself. I couldn’t, but I did find this one which she was very pleased to have made into a ring!
It’s gorgeous, very high and lusciously sparkly.
It was such a pleasure to make – thanks again Rosie! 🙂
I love seeing other people’s processes, and I thought it was time to give you all another look into what goes on in my workshop. I have blogged before about how I create one of my signature big chunky rings, and I thought it was time to examine that process again. Here’s how I do it!
Firstly, an appropriate width strip of sterling silver sheet .6mm thick is selected.
This is curved by hand using a pair of half round pliers to fit the gemstone.
Next, the strip is cut to approximately the right length on my bench peg using my jeweller’s saw, leaving a small extension for soldering against.
In this video, you see me prepare and apply the borax, position the solder (not usually quite so fumbly, I had a bit of stage fright!) and solder the bezel together.
Once the metal is cool, it goes into the pickle to be cleaned. An explanation of pickle can be found in my previous blog post.
I trim the excess bezel metal away from the solder join.
I check to make sure the bezel is a good fit.
I emery the bottom of the bezel so that it is completely flat and will make a good join with the base plate.
I select a piece of 1mm thick sterling silver sheet to fit the bezel.
I solder the bezel to the backing plate. Here you see me applying the paillons of solder with borax, and soldering the join. Then it’s back to the pickle.
After rinsing and drying, a bit of a check to see how it’s looking!
Now, I saw the excess metal from around the bezel setting.
After filing the edges of the bezel setting, I start creating the ring shank.
Using the appropriate width of 1.2mm thick sterling silver plate, I bend the shank to the right shape and size.
I trim the shank to the right length.
I hammer the shank with a mallet to get it perfectly round (this shot is for explanation only, I actually have the mandrel hard up against the bench to absorb the force when I’m really hammering the ring!).
Emerying the inside of the shank with my flex drive makes life easier.
After more filing and emerying, I stamp the inside of the shank with my maker’s mark and 925, which marks the metal as being sterling silver (the 92.5% is the fine silver content).
I solder the shank to the bezel setting assembly.
Then it’s time for plenty more filing, and coarse to fine emerying to bring the ring close to it’s finished state. (Zen or tedium, you decide!)
Next, I head over to my trusty engraving ball to set the stone.
Plenty of gentle hammering with my setting hammer later…
And my work, bar some tidying up, is done!
There it is, a beautiful drusy agate ring. I do so love what I do!
Even though I am not the most massive tweeter on Twitter, I am on there! One of my twitter friends, Anne, admired this malachite ring that I had made for another of my lovely customers.
I happened to have a similarly lovely malachite cabochon in my gemstone collection, and I was happy to use it create this lovely ring for Anne.
I love the contrast and patterns in this stone, and I think it makes a stunning ring against the silver setting. Thanks for commissioning this ring, Anne!